DC 6V/12V, 2A/6A
Automatic Battery Charger
Charge Rate Selector Switch
Use the Charge Rate Selector Switch to select the charge rate or engine starting setting you require.
• 6A/6V - For charging 6V batteries; Manually charge without overcharge protection;
• 2A/12V - For charging 12V automotive, marine and deep-cycle batteries with 2AMP charging rate.
Automatically charge with overcharge protection.
• 6A/12V -For charging 12V automotive, marine and deep-cycle batteries with 6AMP charging rate.
Automatically charge with overcharge protection.
Ammeter
• The Ammeter indicates the amount of current, measured in amps, that is being drawn by the battery.
As a battery takes on a charge, it draws less current from the charger. Correspondingly,the meter will
show less current being drawn by the battery. When the current stops decreasing, the battery is charged
LED Indicator
• Power On- When lit, this LED indicates that there is AC power supplied to the battery charger
Maintain Mode
When the FULL CHARGE (green) LED is lit, the charger has started Maintain Mode.
In this mode, the charger keeps the battery fully charged by delivering a small current, when necessary. If the
battery voltage drops below a preset level, the charger will go back into charge mode until the battery voltage
returns to the full charge level, at which point the charger will return to maintain mode. The voltage is maintained
at a level determined by the BATTERY TYPE selected.
){kind=link}